Nanotubi di carbonio single o multi wall
prezzi imbattibili direttamente dalla fabbrica


i cnt che commercializziamo sono prodotti negli usa e sono disponibili a vari livelli di purezza, con diverse funzionalizzazioni e in diverse tipologie, ognuna delle quali è specifica per applicazioni particolari. Sono disponibili anche fullereni e grafene in varie forme.


Material Safety Data Sheet

Tutti i documenti sulla sicurezza sono in Italiano

e vengono forniti con il prodotto.


Si riporta per informazione una versione in Inglese

acc. to OSHA and ANSI


  1 - Identification of substance:


      Chemical Name: Carbon Nanotubes

      Formula: Carbon

      Chemical Family: Carbon Nanotubes

      Synonyms: Carbon Nanotubes, Single Walled, Double Walled, Thin Walled, Multi Walled Carbon 

      Nanotubes, CNTs, SWNTs, DWNTs, TWNTs, MWNTs

      CAS Number:


All Materials Sold by RL3 srl are for Research & Development Only.


  2 - Composition/Data on components:

  • Chemical characterization:
               Description: (CAS#) 

Component                               %              OSHA/PEL                    ACGIH/TLV


            Synthetic graphite                Up to 100%    15 mg/m3 (total dust)      2 mg/m3 TWA

                                                 5 mg/m3 (respirable fraction)


            Metallic impurity                   Balance


            *Exposure limits based on synthetic graphite

  3 - Hazards identification




Potential Health Effects


    Eye Contact: May cause eye irritation

    Skin Contact: At this time, it is not fully known whether skin penetration of nanoparticles   

    would result in adverse effects in animal models. However,topical application of raw SWCNT

    to nude mice has been shown to cause dermal irritation[Murray et al. 2007]. Studies   

    conducted in vitro using primary or cultured human skin cells have shown that both SWCNT

    and multi-walled carbon nanotubes (MWCNT) can enter cells and cause release of pro-

    inflammatory cytokines, oxidative stress, and decreased viability [Monteiro-Riviere et al.

    2005; Shvedova et al. 2003].  It remains unclear, however, how these findings may be

    extrapolated to a potential occupational risk, given that additional data are not yet

    available for comparing the cell model studies with actual conditions of occupational

    exposure. Research on the dermal exposure of nanomaterials is ongoing (www.unileipzig.

    de/~nanoderm/). Ingestion can occur from

    Inhalation: Inhalation is the most common route of exposure

    to airborne particles in the workplace.  Inhalation may lead to the formation of lung   

    Granulomas or possibly Mesothelioma. Use NIOSH Approved respirators (N100 or P100)    

    with a full face shield to prevent Inhalation.

    Ingestion: No known hazards, but may irritate gastrointestinal tract

    Acute and Chronic High concentration of dusts may be irritating to eyes, skin,

    Health Effects: mucus membranes and respiratory tract. Ingestion can occur from

    Unintentional hand to mouth transfer of materials; this has been found to happen with  

    Traditional materials, and it is scientifically reasonable to assume that it also could happen

    During handling of nanomaterials. Ingestion may also accompany inhalation exposure

    because particles that are cleared from the respiratory tract via the mucociliary escalator

    may be swallowed [ICRP 1994]. Little is known about possible adverse effects from

    the ingestion of nanomaterials.


  • Information pertaining to particular dangers for man and environment
    R 36/37 Irritating to eyes and respiratory system.


  4 - First aid measures

  • After inhalation
    Remove to fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
  • After skin contact
    Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
  • After eye contact
    Rinse opened eye for several minutes under running water. Then consult a doctor.
  • After swallowing Seek immediate medical advice.


  5 - Fire fighting measures


   Flash Point: Not applicable.

    Explosion Limits: Unknown

    Extinguisher Medium: Water, Carbon Dioxide, Dry Chemical, or Foam

    Special Procedures: None

    Decomposition Products: Carbon Monoxide, Carbon Dioxide

    Unusual Hazards: Thermal decomposition or combustion may produce dense


  • Suitable extinguishing agents
    CO2, extinguishing powder or water spray. Fight larger fires with water spray.
  • Special hazards caused by the material, its products of combustion or
      resulting gases:
    In case of fire, the following can be released:
    Carbon monoxide (CO)
  • Protective equipment:
    Wear self-contained respirator.
    Wear fully protective impervious suit.


  6 - Accidental release measures

  • Person-related safety precautions:
    Wear protective equipment. Keep unprotected persons away.
    Ensure adequate ventilation
  • Measures for environmental protection:
    Do not allow material to be released to the environment.
  • Measures for cleaning/collecting: Ensure adequate ventilation.
  • Additional information:
    See Section 7 for information on safe handling
    See Section 8 for information on personal protection equipment.
    See Section 13 for disposal information.


  7 - Handling and storage


·         Handling:   Use PERSONAL PROTECTIVE EQUIPMENT and exposure controls given in Section 8.

               Detailed information on handling carbon nanotubes may be found at the ASTM Standard E 2535 - 07,

               Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings,” ASTM

               International, West Conshohocken, PA,

  • Storage: Keep in closed container for storage
  • Information for safe handling:
    Keep container tightly sealed.
    Store in cool, dry place in tightly closed containers.
    Ensure good ventilation at the workplace.
  • Information about protection against explosions and fires:
    No Special Requirements
  • Requirements to be met by storerooms and receptacles:
    No special requirements.
  • Information about storage in one common storage facility:
    Store away from oxidizing agents.
    Store away from halogens.
    Do not store together with acids.
  • Further information about storage conditions:
    Keep container tightly sealed.
    Store in cool, dry conditions in well sealed containers.


  8 - Exposure controls and personal protection

  • Additional information about design of technical systems:
    Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

    Components with limit values that require monitoring at the workplace:

    ACGIH TLV             2
    Belgium TWA           2.5
    Finland TWA           5
    France VME            2
    Germany MAK           6
    Ireland TWA           5
    Korea TLV             2
    Netherlands MAC-TGG   2
    Poland TWA            2
    Sweden NGV            5 (dust)
    Switzerland MAK-W     2.5
    United Kingdom        5-LTEL
    USA PEL               15 mppcf
  • Additional information: No data

  • Personal protective equipment

1.       Eye Protection: ANSI 787 rated safety glasses with side-shields

2.       Respiratory Protection: NIOSH N-100 or P-100 rated particulate respirator with full face mask.

3.       Skin Protection: Nitrile gloves or equivalent and protective clothing to prevent skin contact, such as cotton fiber lab coat or uniform or Tyvek coveralls

4.       Ventilation: A local or general exhaust system is recommended.

  • General protective and hygienic measures
    The usual precautionary measures for handling chemicals should be followed.
    Keep away from foodstuffs, beverages and feed.
    Remove all soiled and contaminated clothing immediately.
    Wash hands before breaks and at the end of work.
    Avoid contact with the eyes.
    Avoid contact with the eyes and skin.


  9 - Physical and chemical properties:

  • General Information

  • Form: Powders
  • Color: Black
  • Odor: Odorless

Value/Range  Unit    Method

  • Change in condition
  • Melting point/Melting range:       Estimated 3652-3697 ° C     (subl/vac)
  • Boiling point/Boiling range:       Not determined
  • Sublimation temperature / start:   Not determined

  • Flash point:                       Not applicable

  • Ignition temperature:              Not determined

  • Decomposition temperature:         Not determined

  • Danger of explosion:
    Product does not present an explosion hazard.

Explosion limits:

  • Lower:                             Not determined
  • Upper:                             Not determined

  • Vapor pressure:                    Not determined

  • Density:               at   20 ° C            ~ 2.1 g/cm³

  • Solubility in / Miscibility with
  • Water:                             Insoluble


 10 - Stability and reactivity

  • Thermal decomposition / conditions to be avoided:
    Decomposition will not occur if used and stored according to specifications.
  • Materials to be avoided:
    Oxidizing agents
    Interhalogens                                                     Alkali metals 
  • Dangerous reactions No dangerous reactions known
  • Dangerous products of decomposition: Carbon monoxide and carbon dioxide


 11 - Toxicological information

  • Acute toxicity:
  • Primary irritant effect:
  • On the skin: Irritant to skin and mucous membranes.
  • On the eye: Irritating effect.
  • Sensitization: No sensitizing effects known.
  • Subacute to chronic toxicity:
    The inhalation of graphite, both natural and synthetic, has caused pneumoconiosis in exposed workers.  The pneumoconiosis found is similar to coal worker's pneumoconiosis.
  • Additional toxicological information:
    To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
    No classification data on carcinogenic properties of this material is available from the EPA, IARC, NTP, OSHA or ACGIH.

Toxicological information on carbon nanotubes may be found at the website of the International Council on Nanotechnology at


 12 - Ecological information:

  •  General notes:

 Do not allow this material to be released to the environment!


Ecological information on carbon nanotubes may be found at the website of the International Council on Nanotechnology at  RL3 recommends the use of Hazardous Materials Remediation companies for dealing with CNT Waste.  Companies such as Safety Kleen are good companies to dispose of your CNT waste with.


 13 - Disposal considerations

  • Product: Carbon Nanotubes
  • Recommendation
    Consult state, local or national regulations to ensure proper disposal.  Specific care should be taken to insure that no carbon nanotubes or carbon nanotube packaging is released into the environment.
  • Uncleaned packagings:

Consult all state, local or national regulations to ensure proper disposal.  Specific care should be taken to insure that no carbon nanotubes or carbon nanotube packaging is released into the environment.

  • Recommendation:
    Disposal must be made according to official regulations.  Contact a hazardous materials removal company.  Keep all carbon nanotube waste, packaging, and contaminated items segregated from other waste and dispose of with a materials removal company such as Saftey Kleen or others.

 14 - Transport information


Not a hazardous material for transportation.


  • DOT regulations:
  • Hazard class:             None

  • Land transport ADR/RID  (cross-border)
  • ADR/RID class:                None

  • Maritime transport IMDG:
  • IMDG Class:               None

  • Air transport ICAO-TI and IATA-DGR:
  • ICAO/IATA Class:          None

  • Transport/Additional information:
    Not dangerous according to the above specifications.


 15 - Regulations

  • Product related hazard informations:

This material is listed on the US Toxic Substances Control Act (TSCA) Inventory and the

following chemical inventories: Canadian Domestic Substances List (DSL), European

Inventory of Existing Commercial Chemical Substances (EINECS), Korean Existing

Chemicals List (ECL), Australian Inventory of Chemical Substances (AICS), the

Philippines Inventory of Chemicals and Chemical Substances (PICCS), and the Swiss

Giftliste 1 Inventory of Notified New Substances. In addition, this substance is not

regulated in Japan and excluded from the Japanese Chemical Substances Control Law

according to the Japanese Ministry of Economy, Trade and Industry, formerly the

Ministry of International Trade and Industry (MITI).


  • Hazard symbols: Eye Irritant

  • Risk phrases: 36/37 Irritating to eyes and respiratory system.

  • Safety phrases:
    26    In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

  • National regulations
    All components of this product are listed in the U.S. Environmental Protection Agency Toxic Substances Control Act Chemical Substance Inventory.
  • Information about limitation of use:
    For use only by technically qualified individuals.

 16 - Other information:

Employers should use this information only as a supplement to other information gathered by them, and should make independent judgement of suitability of this information to ensure proper use and protect the health and safety of employees.  This information is furnished without warranty, and any use of the product not in conformance with this Material Safety Data Sheet, or in combination with any other product or process, is the responsibility of the user. 


Health Flammability Reactivity BASIS

1 0 0 Synthetic graphite powder



Health Flammability Reactivity BASIS

1 0 0 Synthetic graphite powder

Label Precautions:

Do not get in eyes, on skin or on clothing.

Do not breathe dust.

Wash thoroughly after handling.

Keep container closed.

Use with adequate ventilation.


Label First Aid:

If inhaled, remove to fresh air. If breathing difficulties persist, get medical attention. In

case of contact, immediately flush eyes or skin with plenty of water for at least 15

minutes. If irritation develops or persists, get medical attention.


Disclaimer: Tubes Inc. provides the information contained herein in good faith and makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. Tubes Inc. makes no representations or warranties, either express or implied, regarding the suitability of the material for any purpose or the accuracy of the information contained within this document. Accordingly, Tubes Inc. will not be

responsible for damages resulting from use of or reliance upon this information.